コンテンツへスキップ
ソリューションカタログ

Palmyra Leaf Cutter

Inefficient processes in basket weaving

1/4 - Weak Agriculture & Fisheries 2018

Summary

We tested the performance of a leaf cutter prototype to produce more uniform leaf strips, faster, than the current tools used by weavers in Solor Island, East Nusa Tenggara.

Why we rated it this way

The palmyra leaf cutter prototype was unable to produce a higher volume, and more consistent leaf strips than the manual cutting tool currently used. 

The problem

What we found

Indonesia is the fourth-largest exporter of palmyra leaf basketware in the world, with a total export value of US$57M absorbing 1.38 million workers in the industry. East Nusa Tenggara, and in particular East Flores, is one of the largest producers of basketwear in Indonesia as the raw materials are locally available and are not season-dependent. DuÁnyam, a social enterprise working with 900 weavers across East Flores, stated that their challenge is the inefficient process of cutting palmyra leaves into strips using a manual cutting tool leading to inconsistency in the width of the strips –  affecting the quality of the end product. Therefore, a better tool is needed to help Du’Anyam’s weavers improve the cutting process and the ultimate quality of the end product.

Palmyra Leaf Cutter

The solution

What we tested

Kopernik partnered with DuÁnyam to develop a customized palmyra leaf cutter at their weaving center in Solor Island, East Flores. We tested and compared the performance of the leaf cutter to the manual cutting tool by measuring the quantity of leaves produced and the width consistency over  a specified timeframe.

Palmyra Leaf Cutter

Project design

How we ran it

We designed a palmyra leaf prototype to meet the requirements of: 

  1. Producing more strips than the manual cutting tool by making a plate with several metal lanes and using a clamp to stack leaves to enable cutting of multiple leaves at the same time. 

  2. Producing strips with a consistent width (5mm and 7.5mm width size) by using a steel-strengthened metal surface to guide the cutting process. 

We compared the number of strips and consistency of width produced by the prototype leaf cutter with those produced by the manual cutter over the course of 20 days during  February and March 2019. Each day, we measured the quantity of strips cut per hour and the width consistency of leaf strips.

Project design diagram for Palmyra Leaf Cutter

The technology

The leaf cutter prototype has three metal lanes
The leaf cutter prototype has three metal lanes
The weavers need to stand up and bend over when they use the leaf cutter
The weavers need to stand up and bend over when they use the leaf cutter
The leaf cutter
The leaf cutter
Rumah Anyam in Solor Island, is the center of the woven product development enterprise
Rumah Anyam in Solor Island, is the center of the woven product development enterprise

Results

What we learned

We found that the palmyra leaf cutter prototype generated fewer strips than the manual cutting tool in the specified timeframe. It produced 18% fewer 5mm strips and 64% fewer 7.5 mm strips per hour than the manual cutting tool. This was because the plate and clamp failed to cut multiple leaves at once. 

In terms of width consistency, the cutter produced 43% less consistent strips than the manual cutting tool due to the uneven surface of the metal lanes.

Results chart for Palmyra Leaf Cutter

Conclusion

The results of the experiment showed that the palmyra leaf cutter was unable to produce more strips than the manual cutting tool and those produced were less consistent in width. A much more improved leaf cutter is needed to produce a higher volume  and consistent strips than the manual cutting tool.